Are you having a wet basement and you are wondering about how to waterproof it? This is very possible with the use of various basement waterproofing products available in the market. It is not a must that you will need to purchase everything on the market and mostly what you require is determined by the extent of waterproofing you need to accomplish. In this article, we are going to look at some of the basement waterproofing products that you need to use to waterproof and ensure your basement does not become wet anymore.
Some of the basement waterproofing products are compound, epoxy cement formula, trowel among others. These products are sufficient to handle more than 90% of the basement waterproofing task.
Waterproofing compounds are put on the spaces that are hairline or those that are not possible to be sealed off with the use of the compound itself. What you need to do is to take small amounts of the compound and place it on the cracks and holes and it will be sufficient to prevent water from coming out thereby preventing the basement flooring from getting wet.
Nevertheless, if the size of the hole or crack is extremely big then sealing it with compound will only be a short term remedy. It only takes a short duration before becoming weak and getting compromised. To prevent this from occurring, you should ensure the section where seepage is happening is well cleaned.
The next step involves the use of epoxy cement formula and ensures the hole is patched correctly. This is where trowel proves very important. In circumstances where it is impossible to get into cracks or apply the cement formula on the cracks, using a putty knife should be the most effective way to get into those spaces.
Under normal circumstances, patching is not the perfect solution. This is caused by water pressure is too high and will automatically cause seepage. In such a case you will have to chip out a groove that is approximately equal to the actual length of the section with the crack. Hammer and chisel are the most vital tools that will be required in such a case.
You will learn whether what you have done is right or not if the mortal remains in the same position even after the cracks have dried. If it tends to fall after the crack has dried, then this will be a clear indication that you didn’t get it right. To fix it you will have to use mortar once more to patch it again. You don’t have to be in a hurry when patching so as to avoid mistakes that will make you keep on repeating the same process. Doing it right for the first time will ensure you don’t have to worry about the area letting in water.
Most of the jobs do not demand the use of top basement waterproofing products. You don’t have to purchase all the items, you can use the basics and get the job done.
The discussed above are some of the Ohio basement waterproofing products.